HF32F/024-HS3 identifies the 24 VDC standard-coil version with 1 Form A (SPST-NO) contacts. Retain HS3 or ZS3 in the inquiry so contact form and material remain clear.
Manufacturer source reviewed Request this exact modelHF32F/024-HS3 specifications
Use these specifications to identify your BOM line. MZZ confirms availability, quantity and delivery against your purchasing requirement.
- Nominal coil
- 24 VDC
- Contact arrangement
- 1 Form A (SPST-NO)
- Construction
- Plastic sealed
- Contact material
- AgNi
- Coil type
- Standard, approximately 450 mW
- Coil resistance at 23 C
- 1280 ohm +/-10%
- Resistive contact rating
- 5 A at 250 VAC / 30 VDC; 10 A at 125 VAC
Why the complete code matters
HS3 is the normally-open H contact version with the AgNi material code 3. Do not substitute the lower-power HL coil version without checking the drive circuit and contact-load rating.
Where the HF32F family may fit
These are family-level screening examples. Final suitability depends on the exact load, environment, required life and approvals.
- Compact PCB control assemblies after exact contact and load review
- Appliance controls requiring a verified enclosure and approval set
- Replacement sourcing using the unmodified complete HF32F slash code
What MZZ verifies before quoting
The original BOM code remains unchanged while commercial and technical conditions are checked.
- Complete HF32F slash code
- 1 Form A or 1 Form C contact arrangement
- Rated coil voltage
- Contact material and enclosure construction
- Insulation class, approvals, PCB layout and life requirements
Manufacturer source
The linked manufacturer record controls technical selection. MZZ rechecks the current source and actual supply conditions after receiving the required quantity and destination.
Document reference: 2022 Rev. 1.00; printed pages 100 and 101.
Need HF32F/024-HS3 or another HF32F variant?