HF46F/12-HS1 is a narrow PCB relay reference with a 12 VDC coil and AgNi contacts. The exact suffix helps distinguish material options within the HF46F family.
Manufacturer source reviewed Request this exact modelHF46F/12-HS1 specifications
Use these specifications to identify your BOM line. MZZ confirms availability, quantity and delivery against your purchasing requirement.
- Nominal coil
- 12 VDC
- Contact arrangement
- 1 Form A (SPST-NO)
- Construction
- Plastic sealed
- Contact material
- AgNi
- Termination
- Type 1 PCB
- Nominal coil power
- Approximately 200 mW
- Coil resistance at 23 C
- 720 ohm +/-10%
Why the complete code matters
The T suffix changes the contact material to AgSnO2; the version without T uses AgNi. Keep the material choice explicit when comparing switching duty and contact life. Check the actual resistive or inductive load and switching frequency before confirming suitability.
Where the HF46F family may fit
These are family-level screening examples. Final suitability depends on the exact load, environment, required life and approvals.
- Appliance and equipment control after reviewing the exact resistive, inductive or inrush load rating
- Industrial PCB switching where contact arrangement, coil drive and thermal conditions are verified
- Maintenance BOM sourcing with the original manufacturer code and drawing revision preserved
What MZZ verifies before quoting
The original BOM code remains unchanged while commercial and technical conditions are checked.
- Full manufacturer ordering code and every suffix
- Coil voltage, polarity and switching or latching drive
- Contact arrangement, switching load and electrical-life requirement
- PCB terminals, land pattern, enclosure and packing format
- Required quantity, destination, target date and documentation
Manufacturer source
The linked manufacturer record controls technical selection. MZZ rechecks the current source and actual supply conditions after receiving the required quantity and destination.
Document reference: 2025 Rev. 2.00; printed pages 70 and 71.
Need HF46F/12-HS1 or another HF46F variant?