OMRON G6K-2P-Y-T1 DC3 is listed in the manufacturer ordering table with a 3 VDC coil, DPDT (2c) contacts, single-side stable operation and through-hole PCB terminals. Review the load and PCB requirements before ordering.
Manufacturer source reviewed Request this exact modelG6K-2P-Y-T1 DC3 specifications
Use these specifications to identify your BOM line. MZZ confirms availability, quantity and delivery against your purchasing requirement.
- Nominal coil
- 3 VDC
- Contact arrangement
- DPDT (2c)
- Relay function
- single-side stable
- Terminals
- through-hole PCB
- Enclosure
- fully sealed
- Coil resistance
- 64 ohm; 23 C coil temperature; rated current and resistance tolerance +/-10%
- Rated coil current
- 46.6 mA at rated coil voltage; 23 C coil temperature; rated current and resistance tolerance +/-10%
- Resistive contact rating
- 0.5 A at 125 VAC; 2 A at 30 VDC
- Maximum switching current
- 2 A; apply the manufacturer's voltage/load curve
- Rated carry current
- 2 A; carrying current is not the switching rating
- Operating ambient
- -40 to 125 C; no icing or condensation
- Body height
- 5 mm nominal; check the original drawing and land pattern
- High-temperature load condition
- Manufacturer electrical-endurance condition at 125 C is 1 A at 30 VDC. Do not apply the 2 A switching value unconditionally at 125 C.
Why the complete code matters
G6K-2P-Y-T1 identifies the single-side stable through-hole PCB version; DC3 fixes the rated coil voltage. Preserve Y, T1, RF and packaging suffixes where specified. Confirm polarity/drive timing for latching versions and use the exact PCB drawing. Rated carry current must not be substituted for switching capability.
Where the G6K family may fit
These are family-level screening examples. Final suitability depends on the exact load, environment, required life and approvals.
- Measurement and instrumentation signal paths after exact load and contact-life review
- Communication and equipment control circuits with verified PCB footprint and drive requirements
- Compact control boards where coil power, switching function and packing format matter
What MZZ verifies before quoting
The original BOM code remains unchanged while commercial and technical conditions are checked.
- Full manufacturer ordering code and every suffix
- Coil voltage, polarity and switching or latching drive
- Contact arrangement, switching load and electrical-life requirement
- PCB terminals, land pattern, enclosure and packing format
- Required quantity, destination, target date and documentation
Manufacturer source
The linked manufacturer record controls technical selection. MZZ rechecks the current source and actual supply conditions after receiving the required quantity and destination.
Need G6K-2P-Y-T1 DC3 or another G6K variant?